شروع کار با InstalSystem 5

از HelpSystem
پرش به ناوبری پرش به جستجو
محصول superpipeCAD_5
نوع مقاله درسنامه های طراحی
منبع ترجمه 2022-02-23


محدوده درس

این مقاله اطلاعات عمومی را در ارتباط با محیط کاری SuperpipeCAD_5 ارایه میکند و گامهای اولیه در طراحی را توصیف میکند. بسته نرم افزاری شامل یک "مدیر برنامه" و یک "ویرایشگر" است. به طور همزمان فقط یک مدیر اما چند ویرایشگر باز می توانند باز باشند. به همین دلیل ذخیره کردن فایل ها برخلاف باز کردن آنها فقط با ویرایشگر مجاز است. همه قابلیت های نرم افزار تنها در یک ویرایشگر قابل دسترسی است. برخلاف ورژن 4 که چند ماژول نرم افزاری ارایه شده بود.

ماژول ها و ترکیب بندی نرم افزار

  • ورژن 5 نرم افزار superpipeCAD .
  • اتصال اینترنت

وبینارها

We encourage you to see the video from our webinars on the topics described in this article:


The webinars present the topics described in this article, but they aren’t a recording of this lesson.

گام های اقدامی

آماده سازی محیط کاری

بدست آوردن دسترسی به نرم افزار

در ابتدا لازم است به فایل های نصب نرم افزار دسترسی پیدا کنید. این فایل ها را می توانید از این لینک دانلود کنید: Installation files.

نصب، فعالسازی و به روز رسانی

بعد از دانلود فایل ها، باید آن ها را روی دستگاه خود ذخیره کرده و با استفاده از گزینه "نصب" شروع به نصب نرم افزار کنید.

1. InstalSystem5 Manager EN


نرم افزار نیازمند نصب روی کامپیوتر و فعالسازی است. برای فعالسازی نرم افزار نیاز به یک کد درست است. نسخه آزمایشی احتیاج به کد ندارد. نسخه های آزمایشی را می توانید از لینک زیر دانلود کنید:Trial versions.

2. Program activation


قبل از نصب، از اینکه کامپیوتر شما مشخصات لازم (لینک زیر) را دارد، اطمینان حاصل کنید: Package technical specifications.

For more information, see: Installation, activation and update InstalSystem 5 package.

بازکردن فایل پروژه و مدیریت پروژه ها

ساخت یک پروژه جدید و بازکردن یک پروژه موجود

نرم افزار را به کار بیندازید، برای این کار منوی استارت را باز کنید، نسخه 5 را بیابید و روی "مدیریت نرم افزار" ورژن 5 کلیک کنید.

  1. پروژه جديد وقتی که یک فایل جدید را باز می کنید،‌ می‌توانید یک فایل الگو را برای استفاده در نرم افزار انتخاب کرده و نسخه دلخواه را برای ادامه کار بر گزینید. توصیه می‌شود آخربن نسخه نرم‌افزار را انتخاب کنید.
  2. باز كردن پروژه برای باز کردن یک فایل موجود، می‌توانید نسخه مورد نظر خود را برای ادامه ویرایش فایل انتخاب کنید. این گزینه شما را قادر می‌سازد تا ادامه ویرایش فایل را با همان نسخه ای از نرم‌افزار ادامه دهید که فایل در ابتدا با آن ساخته شده است.InstalSystem 4.
    For more information, see: Design based on a project file from InstalSystem 4
    3. New file

Managing project files

All details to be found in Project and application management

Working with the project

General data

In the first stage of working with the project, general data are set and default settings, which are used throughout the project, are verified.
الگو:For more information, see: General data.

Basic components of graphic editing environment

The basic locations where project data are edited are the ویرایشگر 2 بعدی and جدول داده‌ها windows. How to open or change the location of these windows within the screen is described in: Software configuration. The most important functions are accessible through the ابزارهای اصلی bar and through the pop-up menu displayed after pressing the right mouse button. The pop-up menu is context-dependent - its availability and content depend on the location within the screen or object being indicated.

4. Basics of graphic editing


Software configuration

The InstalSystem 5 package may be configurated on various levels, thus granting possibility to be adjusted according to the user's requirements. For more information, see: Software configuration.

Setting up the building structure

The building structure forms a base for creating the system design. The building may consist of several storeys. A separate drawing sheet in the form of a plan is created automatically for every storey. In this sheet, components of the building structure and of the system under design within that storey can be edited. The individual domains of the project are edited on separate tabs (layers), whereas the entire building and all of its systems designed form one consistent and integrated project.
There are several methods of preparing the building structure for the design. Selection of the method depends on available building structure and plan source data; furthermore, it depends on the scope of project to be prepared. Based on the aforementioned, we may define the structure as:

  1. "Arrangement of rooms" in case only rooms are contoured
  2. "Full builidng structure" or "building strucutre" for a building with walls, ceilings etc.


For more information, see: Preparation of building structure
For more information, see: Import underlay files

Verification of the correctness of building structure

For more information, see: Verification of the correctness of building structure
For more information, see: view navigation in the graphical editor

Installation editing

The basic way to enter data of the system under design in InstalSystem 5 is graphical editing. Designing consists in placing objects (installation components) in the drawing and making appropriate connections between them. Work is done on plan views of the building storeys. The installation thus created can then be modified in any way, its fragments can be copied, and other operations can be made on it.

  • The software package offers a number of functions that support graphical editing, reduce the scope and time of necessary manual operations at this stage of design. Some components may be inserted or generated automatically. It is also possible to insert and edit groups of components.
  • There is a range of predefined graphical objects that can be used in the project. Examples: 'ترسيم جدول', where designer data can be entered and which can be used when printing the project, or interactive elements, such as 'جدول كلكتور' and برچسب. Upon assigning them to defined system components, they will automatically display current data of these components.
  • It is particularly straightforward and problem-free to make all kinds of modifications to the project - the ergonomics and ease of calculation of the modified design is one of the biggest advantages of the working environment of InstalSystem 5.
  • The program automatically indicates ordinates of horizontal pipe-run sections on the basis of ordinates of elements that connect the pipe-runs. In addition, the user may correct vertical layout of pipe-runs. by changing its properties in the general data table. Indication of ordinates is performed by checking connections, which is always the first phase of calculations; such calculations may also be activated manually.

Examples of editing are shown in the films below.







Detailed information on Installation edit, in the context of the type of system being designed or calculations performed, is given in the descriptions of program applications - see: DESIGN APPLICATIONS.

Verification of the correctness of installation structure

Before detailed component data are appended it is a good idea to check the structure of the system and component connections. Corrections made to the structure may cause changes or even removal of some of the components, then the time spent on entering data would be lost. The following tools are available:

  1. The tool that enables checking connections between system components in the project is the بررسی اتصالات function, which is also available through the keyboard shortcut Shift+F2.
    5. "Check connections" function


  2. The tool that enables visual verification of the installation structure is, as is the case with building structure verification, the نمای 3 بعدی. The نمای 3 بعدی can be enabled permanently, which allows verifying system correctness continuously during editing. In this case it is particularly advantageous to work using two display monitors simultaneously. Note, however, that using نمای 3 بعدی slows down the program. When working on a slow computer or working with a large project, it is better to enable نمای 3 بعدی only to verify the status of the project, and to do the design work without opening the نمای 3 بعدی window.
    6. Installation structure

Component data edit

Every component in the project has its set of data. Editing these data is possible in the جدول داده‌ها after marking that component. The جدول داده‌ها can be toggled on/off by selecting it in the پنجره‌ها menu on the toolbar or using the F12 key.

7. Data table


  • A significant portion of the data of new components placed in the drawing is appended automatically. This highly facilitates work on the project. The range of automatically appended data differs depending on the type of component and on other factors.
    • The basic mechanism in this area is propagation of General data
    • Some data are established based on component location and size / shape of component placed in the drawing
    • Many detailed data of components that are associated with catalogue data and have a specified catalogue type are read from the catalogue.
  • Any default data can be overwritten with other data at any time. Information on whether the current value is derived from the or is another type of default data, or whether it is a user-defined value, is in the form of an icon placed to the right of the data field in the جدول داده‌ها. Clicking this symbol changes the data status. In particular it enables reverting to the Default status.
    • A Computer symbol indicates a default value
    • A Pencil symbol indicates a user-specified value
  • Data of any component can be entered or modified at any moment when working with the project.
    • Component data can be edited right after placing the component in the project, and this is recommended for some components. This particularly applies to these components that do not depend on other drawing components and the number of which in the project is low.
    • In the case of components the number of which is high it is advisable to edit their data at one stage to take advantage of group editing. To this end it is necessary to press and hold the Ctrl key and click every component to be marked or use the tools for multiple selection of elements. For more information, see: Selecting and editing multiple elements

Calculations and diagnostics

Calculations include all operations necessary to obtain complete results: data propagation, component sizing, engineering calculations and automatic graphical editing. All data that have an effect on the selected scope of the project are taken into consideration: general data, building data, drawings of the system under design, parameters of components used to construct the system taken from catalogues. This means that the program automatically provides high level of completeness and consistency of data and results. This approach greatly facilitates reverting to any of the previous stages of editing - after changing selected data, calculations can be conducted again to obtain complete and current results. Ease of reverting provides great comfort and speed of work in the context of calculating various design options, taking into account the changing requirements of the project developer or changes in the structure of the building introduced during the design of the installation.

Running calculations - the محاسبات section of the ابزارهای اصلی bar contains tools that enable starting and managing calculations. Calculations can be made for for all selected project scopes, in the depicted order (downwards), or for selected scopes. Calculation modules have been indicated with the red frame.

8.Calculation modules


In the Calculations section of the Main tools toolbar, the following icons are present:

Diagnostics and error list - Viewing and handling diagnostic messages
نتایج - Presentation of the calculations result

Preparation of drawings for export/printing

For more information, see: Preparation of drawings for export / import

Export/print results and drawings

Result tables and drawings can easily be printed or exported in one of the many available formats. In order to obtain printouts of drawings with results or of results tables as well as their export, it is necessary to enable proper program windows: "2D editor", "3D view", "Printouts" and to perform further actions in these windows.

  1. Print tables and lists - it is possible to create and save your own printouts and print results of calculations directly on the printing device or export to selected format.
  2. Print drawings - it is possible to determine the layout of graphic print pages and print drawings from project directly on the printing device or export to selected format.

For more information, see: Export / Print results and drawings.



برگرفته از «https://ir.help.instalsoft.com/index.php?title=شروع_کار_با_InstalSystem_5&oldid=12001»